? semiconductor components industries, llc, 2015 july, 2015 ? rev. p3 1 publication order number: ESD5102/d ESD5102 product preview esd protection diodes micro?packaged diodes for esd protection the ESD5102 is designed to protect voltage sensitive components from esd. excellent clamping capability, low leakage, and fast response time provide best in class protection on designs that are exposed to esd. because of its small size, it is suited for use in smartphone, smart-watch, or many other portable / wearable applications where board space comes at a premium. features ? bi?directional dual line esd protection ? low capacitance (5 pf max, i/o to gnd) ? small body outline dimensions: 0.705 x 0.23 mm ? protection for the following iec standards: iec 61000?4?2 (level 4) ? low esd clamping voltage ? these devices are pb?free, halogen free/bfr free and are rohs compliant maximum ratings (t j = 25 c unless otherwise noted) rating symbol value unit operating junction temperature range t j ?55 to +125 c storage temperature range t stg ?55 to +150 c lead solder temperature ? maximum (10 seconds) t l 260 c iec 61000?4?2 contact (esd) iec 61000?4?2 air (esd) esd esd 15 15 kv kv stresses exceeding those listed in the maximum ratings table may damage the device. if any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. see application note and8308/d for further description of survivability specs. this document contains information on a product under development. on semiconductor reserves the right to change or discontinue this product without notice. marking diagram pin configuration and schematic www. onsemi.com 12 device package shipping ? ordering information ESD5102fct5g dsn3 (pb?free) 10,000 / tape & reel ?for information on tape and reel specifications, including part orientation and tape sizes, please refer to our tape and reel packaging specification brochure, brd8011/d. dsn3 case 152aw 3 t = specific device code m = month code t m
ESD5102 www. onsemi.com 2 electrical characteristics (t a = 25 c unless otherwise specified) parameter symbol conditions min typ max unit reverse working voltage v rwm i/o pin to gnd 3.3 v breakdown voltage v br i t = 1 ma, i/o pin to gnd 4 5 6.5 v reverse leakage current i r v rwm = 3.3 v, i/o pin to gnd 1 a clamping voltage tlp (note 1) v c i pp = 8 a iec 61000?4?2 level 2 equivalent ( 4 kv contact, 4 kv air) 5.4 v i pp = 16 a iec 61000?4?2 level 2 equivalent ( 8 kv contact, 15 kv air) 6.5 junction capacitance c j v r = 0 v, f = 1 mhz 5 pf 1. ansi/esd stm5.5.1 ? electrostatic discharge sensitivity testing using transmission line pulse (tlp) model. tlp conditions: z 0 = 50 , t p = 100 ns, t r = 4 ns, averaging window; t 1 = 30 ns to t 2 = 60 ns.
ESD5102 www. onsemi.com 3 typical characteristics figure 1. cv characteristics figure 2. s21 insertion loss figure 3. capacitance over frequency figure 4. positive tlp i?v curve figure 5. negative tlp i?v curve v bias (v) 2.5 1.5 3.5 0.5 ?0.5 ?1.5 ?2.5 ?3.5 0 1 2 3 4 5 6 10 c (pf) 7 8 9 frequency (hz) 1.e+07 ?10 ?8 ?4 ?2 0 2 (db) ?6 1.e+08 1.e+09 frequency (ghz) 2.5 1.5 1.0 0.5 0 1 3 4 5 7 8 10 capacitance (pf) 2 6 9 2.0 3.0 v c , voltage (v) 20 18 14 12 8 4 2 0 0 2 6 8 10 14 18 20 tlp current (a) 4 12 16 610 16 0 2 10 4 6 8 v iec , equivalent (kv) v c , voltage (v) 20 18 14 12 8 4 2 0 0 ?2 ?6 ?8 ?10 ?14 ?18 ?20 tlp current (a) ?4 ?12 ?16 610 16 0 2 10 4 6 8 v iec , equivalent (kv)
ESD5102 www. onsemi.com 4 iec 61000?4?2 spec. level test volt- age (kv) first peak current (a) current at 30 ns (a) current at 60 ns (a) 1 2 7.5 4 2 2 4 15 8 4 3 6 22.5 12 6 4 8 30 16 8 i peak 90% 10% iec61000?4?2 w aveform 100% i @ 30 ns i @ 60 ns t p = 0.7 ns to 1 ns figure 6. iec61000?4?2 spec transmission line pulse (tlp) measurement transmission line pulse (tlp) provides current versus voltage (i?v) curves in which each data point is obtained from a 100 ns long rectangular pulse from a charged transmission line. a simplified schematic of a typical tlp system is shown in figure 7. tlp i?v curves of esd protection devices accurately demonstrate the product?s esd capability because the 10s of amps current levels and under 100 ns time scale match those of an esd event. this is illustrated in figure 8 where an 8 kv iec 61000?4?2 current waveform is compared with tlp current pulses at 8 a and 16 a. a tlp i?v curve shows the voltage at which the device turns on as well as how well the device clamps voltage over a range of current levels. figure 7. simplified schematic of a typical tlp system dut l s oscilloscope attenuator 10 m v c v m i m 50 coax cable 50 coax cable figure 8. comparison between 8 kv iec 61000?4?2 and 8 a and 16 a tlp waveforms
ESD5102 www. onsemi.com 5 package dimensions dsn3, 0.73x0.25, 0.27p case 152aw issue o a b e d bottom view b l 0.05 c top view a a1 c seating plane side view dim min max millimeters a 0.13 0.23 a1 ??? 0.03 b 0.11 0.17 d 0.73 bsc e 0.25 bsc solder footprint* dimensions: millimeters 0.19 0.31 *for additional information on our pb?free strategy and soldering details, please download the on semiconductor soldering and mounting techniques reference manual, solderrm/d. 1 l 0.18 0.24 0.22 recommended pin 1 reference e 0.27 bsc 3x e 2x 3x 0.05 c 3x 0.05 c 2x 2x a 0.05 b c 0.03 c a 0.05 b c 0.03 c 0.27 pitch on semiconductor and the are registered trademarks of semiconductor components industries, llc (scillc) or its subsidia ries in the united states and/or other countries. scillc owns the rights to a number of pa tents, trademarks, copyrights, trade secret s, and other intellectual property. a listin g of scillc?s product/patent coverage may be accessed at www.onsemi.com/site/pdf/patent?marking.pdf. scillc reserves the right to make changes without further notice to any product s herein. scillc makes no warranty, representation or guarantee regarding the suitability of its products for any part icular purpose, nor does sci llc assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. ?typi cal? parameters which may be provided in scillc data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. all operating param eters, including ?typicals? must be validated for each customer application by customer?s technical experts. scillc does not convey any license under its patent rights nor the right s of others. scillc products are not designed, intended, or authorized for use as components in systems intended for surgic al implant into the body, or other applications intended to s upport or sustain life, or for any other application in which the failure of the scillc product could create a situation where personal injury or death may occur. should buyer purchase or use scillc products for any such unintended or unauthorized application, buyer s hall indemnify and hold scillc and its officers , employees, subsidiaries, affiliates, and dist ributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that scillc was negligent regarding the design or manufac ture of the part. scillc is an equal opportunity/affirmative action employer. this literature is subject to all applicable copyright laws and is not for resale in any manner. p ublication ordering information n. american technical support : 800?282?9855 toll free usa/canada europe, middle east and africa technical support: phone: 421 33 790 2910 japan customer focus center phone: 81?3?5817?1050 ESD5102/d literature fulfillment : literature distribution center for on semiconductor p.o. box 5163, denver, colorado 80217 usa phone : 303?675?2175 or 800?344?3860 toll free usa/canada fax : 303?675?2176 or 800?344?3867 toll free usa/canada email : orderlit@onsemi.com on semiconductor website : www.onsemi.com order literature : http://www.onsemi.com/orderlit for additional information, please contact your loc al sales representative
|
